User`s manual

TM-C3400 User’s Manual 9
English
Setting DIP Switches
When you open the ink cartridge cover and remove the DIP switch
cover, you will find the DIP switches. Set the DIP switches, using the
tip of a tool, such as a small screwdriver. Change settings when the
printer is off.
Installing Paper
Follow the steps below to install the paper.
❏ When you install paper on the printer for the first time:
➁ ∼ ➄
❏ When you have used up the paper (when you install same type of
paper):
➀ and ➄
❏ When you change the paper type: ➀ ∼ ➄
For ➂ and later, the procedures differ depending on the paper form,
roll paper or fanfold paper.
CAUTION:
Be sure to confirm that DIP switch 3 (Paper selection) is set correctly
before installing the paper.
SW Function ON OFF
1 Operation of the
power switch
Reset Power on/off
2 Internal use Fixed to OFF (Do not change.)
3 Paper selection Fanfold paper Roll paper
8Buzzer volume High Low
When installing roll paper
When installing fanfold paper
➀ Removing paper
➁ Setting paper position detection
➂ Removing the paper feed guide ➂ Attaching the paper feed guide
➄ Loading the paper
and Turning on the printer
➃ Adjusting the guides ➃ Adjusting the guides
➄ Loading the paper
and Turning on the printer