Product specifications

Chapter 5 Setting the Printer Driver
85
5
• Composite: Turn on the check box to print the 2D symbol with a composite symbol.
• Use a Quiet Zone: Leaves a blank margin around 2D symbols.
2
Make settings of the following items according to the selected [Type].
•PDF417
•QRCode
• MaxiCode
Separate the data specified to a composite symbol and a 2D symbol with “\ |” or “| \”.
Describe the data in the order of the composite symbol and the 2D symbol.
Example: 1234567890\ |012345678905
The 2D symbol printing position is moved based on the amount of margin.
Item Description
Module Width Makes settings of the module width for PDF417.
Module Height Makes settings of the module height for PDF417 by the ratio to the
module width.
Column Input the number of columns for PDF417.
Step Enter the number of steps for PDF417.
Truncation Symbol Turn on this check box when making a symbol without the stop code.
Error Correction Level Select an error correction level for PDF417. The data can be read even
if the part of the symbol is broken, and restoration ratio becomes
higher for bigger numbers.
Item Description
Model Select a QRCode model.
Module Select the width of cell (module) for QRCode.
Version Specify the version for QRCode. The number of characters that can
be converted into 2D symbols is different depending on the version of
QRCode.
Error Correction Level Select an error correction level for QRCode. The data can be read if
the part of the symbol is broken and restoration ratio becomes higher
in the order of level L, M, Q, H.
Item Description
Mode Select a MaxiCode mode. Turn on the check box of [Hexadecimal
Entry Mode] when selecting [Mode 2] or [Mode 3].