Product specifications
Table Of Contents
- Cover
- For Safety
- About this Manual
- Contents
- Chapter1 Overview and Basic Operations
- Chapter2 Setup
- Chapter3 Preinstalled OS Information
- Chapter4 Utility
- Chapter5 Setting the Printer Driver
- Chapter6 Application Development Information
- Chapter7 Maintenance
- Appendix
34
Ejection Angle of Printed Paper
Make sure paper is ejected straight from the paper ejection guides, as shown in the illustration.
If paper is not ejected straight due to such causes as an obstruction, the print result may be distorted.
Printer Buttons
FEED button
❏ Feeds the paper continuously when media position detection is set to “No Detection”.
• The paper is fed by 15 mm if FEED button is pressed once.
• If the FEED button is held down, the paper is continuously fed until the button is released.
(6 seconds at a maximum)
❏ Feeds the paper to the print starting position when media position detection is set to “Detects Black
Marks” or “Detects Margins Between Labels”.
CUT button
❏ Feeds the paper to the first auto cut position on the next page and cuts the paper automatically
when media position detection is set to “No Detection”.
❏ Feeds the paper to the autocut position by detecting the gap between the black marks or labels
and cuts the paper automatically when media position detection is set to “Detects Black Marks” or
“Detects Margins Between Labels”.
The media position detection setting is set on [Maintenance And Utilities] tab on the printer
driver.