Product specifications
Table Of Contents
- Cover
- For Safety
- About this Manual
- Contents
- Chapter1 Overview and Basic Operations
- Chapter2 Setup
- Chapter3 Preinstalled OS Information
- Chapter4 Utility
- Chapter5 Setting the Printer Driver
- Chapter6 Application Development Information
- Chapter7 Maintenance
- Appendix
184
Paper is Not Cut Cleanly
Cannot Read Barcode
Symptoms /
Problem Condition
Verification Method / Countermeasures
Paper is Not Cut Cleanly Is the autocutter dirty?
If the fixed blade of the autocutter is dirty, clean the blade.
For details, see "Cleaning the Autocutter" on page 169.
Symptoms /
Problem Condition
Verification Method / Countermeasures
Barcode cannot be read Is the barcode reader properly connected?
Verify that the barcode reader is properly connected to a USB connector
on the rear of the product.
For details, see "Connecting the Cable" on page 37.
If the print data contains the graphic data of a barcode, is the
barcode reduced?
If the barcode is reduced, lines may be faint and spaces may be crushed,
and as a result, it may not be read correctly.
Is the barcode difficult to read?
Print the barcode in cyan only.
For details, see "Printing the barcode in cyan only" on page 83.