Product specifications
Table Of Contents
- Cover
- For Safety
- About this Manual
- Contents
- Chapter1 Overview and Basic Operations
- Chapter2 Setup
- Chapter3 Preinstalled OS Information
- Chapter4 Utility
- Chapter5 Setting the Printer Driver
- Chapter6 Application Development Information
- Chapter7 Maintenance
- Appendix
170
Exterior Surface Cleaning
To be able to comfortably use the product at any time, clean the product following the method below.
1
Turn off the power.
For details on how to turn off the power, see "Power Off" on page 25.
2
Once the power lamp goes off, unplug the power plug from the outlet.
3
Use a soft cloth to wipe off dust and dirt.
When the exterior surface is very dirty, soak a soft cloth in water that contains a small amount of
mild detergent and after wringing the cloth thoroughly, wipe off the dirt with the cloth. When fin-
ished, wipe off the moisture with a dry, soft cloth.
4
Plug the power plug into the outlet and turn on the power.
Close the cover before wiping the product so that moisture does not get inside the prod-
uct. If the interior of the product becomes wet, a short circuit may occur.
Do not use volatile chemicals such as benzene, paint thinner, alcohol, etc. The surface
or interior of the product may become distorted or deformed.
Do not use a hard brush. It may scratch the surface of the product.