Product specifications
Table Of Contents
- Cover
- For Safety
- About this Manual
- Contents
- Chapter1 Overview and Basic Operations
- Chapter2 Setup
- Chapter3 Preinstalled OS Information
- Chapter4 Utility
- Chapter5 Setting the Printer Driver
- Chapter6 Application Development Information
- Chapter7 Maintenance
- Appendix
Chapter 7 Maintenance
169
7
Cleaning the Autocutter
Adhesive from labels may stick to the fixed blade of the autocutter, which may prevent the autocutter
from cutting paper cleanly. If this happens, follow the steps below to clean the autocutter.
1
Turn off the power.
For details on how to turn off the power, see "Power On/Off" on page 25.
2
Once the power lamp goes off, unplug the power plug from the outlet.
3
Open the roll paper cover to remove the paper.
4
Remove the adhesive on the autocutter blade with an implement such
as a cotton swab.
If necessary, moisten the cotton swab with alcohol.
CAUTION
Do not touch the fixed blade of the autocutter directly. Doing so may cause injury.
Autocutter blade