Product specifications
Table Of Contents
- Cover
- For Safety
- About this Manual
- Contents
- Chapter1 Overview and Basic Operations
- Chapter2 Setup
- Chapter3 Preinstalled OS Information
- Chapter4 Utility
- Chapter5 Setting the Printer Driver
- Chapter6 Application Development Information
- Chapter7 Maintenance
- Appendix
Chapter 7 Maintenance
167
7
Self-test
Printing errors such as dot missing can be checked on self-test mode. In addition, Post-Printing
Verification Settings, and media position detection setting can be checked.
Follow the steps below to run the self-test.
1
Set the die-cut label, receipt or continuous label which length is 90 mm
or more.
2
Verify that the printer is off.
3
Turn on the printer while pressing the paper feed button.
Following test pattern is printed.
Post-Printing Verification Setting
Media Position Dctection