Product specifications
Table Of Contents
- Cover
- For Safety
- About this Manual
- Contents
- Chapter1 Overview and Basic Operations
- Chapter2 Setup
- Chapter3 Preinstalled OS Information
- Chapter4 Utility
- Chapter5 Setting the Printer Driver
- Chapter6 Application Development Information
- Chapter7 Maintenance
- Appendix
134
TMC34LT_SetPrinterBin
Set the media source.
Syntax
int TMC34LT_SetPrinterBin(long nBin, PTSTR pMessageBuf)
Argument
nBin : This specifies the media source.
pMessageBuf : This specifies the address of error message store area.
Error message is returned by Uicode.
Return Value
This API will be success only when the roll paper cover is closed without media and printer
status is ready.
Setting Value Media source
0 Roll media
1 Fanfold media
Return Value Description
0 Success
Less than 0 Failed
1
Mechanical adjustment inside printer is required.
Contact the store where you purchased the product or an Epson service center.
2 or 3
Uncleanable clogged print head nozzles detected.
Please turn the printer off.
You can continue printing, but the print result may be affected.
Please contact the store where you purchased the product or an Epson service
center as soon as possible.
5
Printer error. (xxx) *
Please turn the printer off.
Remove any foreign objects from inside the printer then turn the printer back on. If
this is the first print job, please, check to make sure all packing materials and parts
have been removed.
*xx indicates the Fatal error code.