Installation manual

A-2 Acquiring printer information by PRINTER_INFO_2 Rev.F
Advanced Printer Driver Printer Driver Specification
PRINTER_INFO_2 Status of TM-printer
PRINTER_STATUS_USER_INTERVENTION An error has occurred.
1.Printing on the paper roll is not performed correctly due to a
cover-open.
2.Print head temperature error
3.The autocutter does not work correctly.
4.The home position cannot be detected due to a paper jam.
5.The carriage is out of phase.
6.The cut sheet cannot be ejected even if a certain amount of
feeding is tried.
7.The CPU on the printer executes an incorrect address or the I/F
board is not connected.
8.After R/W checking, the printer does not work correctly
9.The power supply voltage is extremely high.
10.The power supply voltage is extremely low.
11.Internal circuit does not work correctly.
12.UIB does not work correctly.
PRINTER_STATUS_WAITING not available
PRINTER_STATUS_WARMING_UP not available