Installation manual

Rev. F Utilities 3-11
TM-C100 Printer Driver Operation Manual
Top-Margin Correction Utility
The Top-Margin Correction utility enables you to print a test page and correct any top margin
misalignment problem.
Use the following procedure to correct a top margin misalignment problem.
1. Remove the Roll Paper Holder if it is installed on the printer.
2. Turn on the power of the printer.
3. Manually load paper of A6 or larger size.
Note:
To correct the top margin misalignment problem, be sure to always use paper of A6 or larger size, and
set the paper source to “Manual Feed Slot”; if you use any other combinations, the printer still works
but the print result is not guaranteed. (For information on how to load paper, refer to the “TM-C100
User's Manual” supplied with the printer. For information on how to set up the paper source, see
“Paper Source” on page 2-7.)
4. From the [Utility] tab, click [Top-Margin Correction]. The following message appears.
5. Click [Next]. A test page is printed by using the current top margin position correction
value, and the following message appears.