TM-T88III User’s Manual / Bedienungsanleitung Gebruikershandleiding / Manuel d’utilisation Manual do utilizador / Manual del usuario Manuale dell’utente 410031701
Printer Parts 1 printer cover 4 control panel 2 cutter cover POWER PO WE ER R RO R P OU APE R FE T ED ERROR PAPER OUT FEED 3 cover open button DIP Switch Tables Serial Parallel SW Function ON OFF SW Function ON OFF 1-1 Data receive error Ignored Prints “?” 1-1 Auto line feed Always disabled 1-2 Receive buffer capacity 45 bytes 4K bytes Always enabled 1-2 Receive buffer capacity 45 bytes 4K bytes 1-3 Select paper sensors to output paper-end signals (default value of ESC c 3) Di
English All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein.
English Safety Precautions This section presents important information intended to ensure safe and effective use of this product. Please read this section carefully and store it in an accessible location. WARNING: Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise. Continued use may lead to fire. Immediately unplug the equipment and contact your dealer or a SEIKO EPSON service center for advice. Never attempt to repair this product yourself.
English Caution Labels WARNING: Do not connect a telephone line to the drawer kick-out connector; otherwise, the printer and the telephone line may be damaged. CAUTION: The thermal head is hot. CAUTION: Caution label for autocutter blade. Unpacking The following items are included with the standard specification printer. If any item is damaged, contact your dealer. ❏ Printer ❑ Paper roll ❏ Power switch cover ❑ Connector cover * ❏ AC adapter * * May not be included with your printer.
English Control Panel FEED button This button feeds paper. POWER LED The POWER LED is on when the printer is on. ERROR LED This indicates an error. PAPER OUT LED On indicates a paper near end or out. Flashing indicates standby. Using the Power Switch Cover WARNING: If an accident occurs with the power switch cover attached, unplug the power cord immediately. Continued use may cause fire or shock.
English To remove the connector cover, turn the printer over, insert a flathead screwdriver under one hook, and pry up the hook while lifting the connector cover. See the illustration on the right below. Repeat this step for the other side. hook screwdriver bottom of the printer Note: Be careful not to damage the cables with the screwdriver. Installing the Paper Roll 1. Press the button, as shown on the left below, to open the cover. 2.
English Troubleshooting No LEDs on the control panel Check the power supply cable connections and the power outlet. ERROR LED on (not flashing) with no printing If PAPER OUT is on, the paper roll is not installed or is near the end. If PAPER OUT is off, the printer cover is not closed properly. ERROR LED flashing with no printing (and no paper jam) Printing stops if the head overheats and resumes when it cools. Turn the printer off, and after 10 seconds, back on.
English Cleaning the Print Head CAUTION: After printing, the print head can be very hot. Be careful not to touch it and to let it cool before you clean it. Do not damage the print head by touching it with your fingers or any hard object. Turn off the printer, open the paper roll cover, and clean the thermal elements of the print head with a cotton swab moistened with an alcohol solvent (ethanol, methanol, or IPA).
English Receive buffer 4KB/45 bytes DKD Function 2 drives Power supply + 24 VDC ± 7% Current consumption (at 24V) High-speed mode: Mean: Approx. 1.8A Low-power mode: Mean: Approx. 1.2A Life Mechanism: Thermal head: Autocutter: MTBF 360,000 hours MCBF 52,000,000 lines (Average failure interval based on failures relating to wearout and random failures up to the life of 15 million lines.
