Material Safety Data Sheet

Version 3.9 (USA)
SDS T220XL420 2 Release Date 3/1/14
4.1 Description of measures
Eyes :
Skin :
Inhalation :
Immediately flush with room temperature, low pressure, clean water.
Seek medical attention if irritation continues.
IF ON SKIN : Wash with soap and water. Take off contaminated
If skin irritation occurs, get medical advice/attention.
Remove subject to ventilated fresh air. If not breathing, give artificial
respiration right away. If breathing is difficult, give oxygen. Seek immediate
medical attention.
Ingestion :
Seek medical advice, and attention if stomach continues to be upset.
4.2
Most important
symptoms and effects,
Ink contact with skin may cause irritation, swelling, or redness.
both acute and delayed:
4.3 Indication of any immediate medical attention and special treatment needed : Not necessary
Section 5 : Fire-fighting measures
5.1 Extinguishing media
Suitable media : Water spray, dry chemical, carbon dioxide, or alcohol resistant foam. Unsuitable
media : None
5.2 Special hazards from
None
mixture :
5.3 Firefighters : Use PPE, avoid a leeward position.
Section 6 : Accidental release measures
6.1 Personal precautions, protective equipment, and emergency procedures
Non-emergency Eye and skin protection required during clean-up. Use proper ventilation.
personnel :
Emergency responders: None
6.2 Environmental precautions : Do not release to sewer, surface, or ground water.
6.3 Methods and material for containment and clean-up
Spill containment :
Spill clean-up :
Use sponges to wipe-up ink.
Rinse area with damp cloth. Place waste in closed container for disposal.
Wash hands with soap and water.
Other information :
Do not dispose of waste to sewer.
6.4 Reference to other sections : Please refer to Section 13 for disposal.
Section 7 : Handling and storage
7.1 Precautions for safe handling