Operation Manual

Making Enlarged Copies
with a A3 or A4 Scanner
Connecting an Epson A3 or A4 scanner to the printer
makes creating enlarged copies a snap; no computer is
required.
Supported scanners are listed on the Epson website.
http://www.epson.com
Supported Sizes
Scanned document size: 4x6 - A3
*1
Output size: Up to A2 or 36 inches (approximately 914
mm)
*2
*1 Varies with the model of scanner connected.
*2 Up to 24 inches (approximately 610 mm) with the
SC-T3200 Series.
Connecting the Scanner
A
Ready both the printer and the scanner.
For information on setting up the scanner, see
the documentation supplied with the device.
B
Turn the printer and scanner off.
C
Connect the scanner to the printer using the
cable supplied with the scanner.
c
Important:
Connect the scanner directly to the printer.
Enlarged copies are only available when the
scanner is connected directly to the printer.
Making Enlarged Copies
Copy results are printed along the following loading
paths depending on the model you are using.
❏ SC-T7200 Series/SC-T5200 Series/SC-T3200 Series
Loaded roll paper or cut sheet
❏ SC-T7200D Series/SC-T5200D Series
Currently selected roll paper or cut sheet
You can check the paper currently selected by
selecting the . tab.
Buttons that are used in the following settings
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Copying and Scanning
83