Operation Manual

If Shared Folder or Send By Mail was selected,
proceed to Step 7.
G
Use the d/u buttons to select the save
destination folder or address, and then press the
Z button.
H
The details of the main scan settings appear.
When the Z button is pressed, scanning starts.
To change the settings, press the Menu button to
display the Scan Setting menu.
Using the Scan Setting menuU “Menu
Operations” on page 136
SettingsU “Large Copy / Large Scan menu” on
page 174
I
When scanning has finished, the screen returns
to the one in Step 8. Press the r button to eject the
document. When the Z button is pressed after
loading the document, you can continue saving
or sending scanned files to the same save/send
destination.
After scanning has finished, always eject the
document. If the next document is loaded with
the previous document still inside, the next
document cannot be fed correctly.
You can change the eject direction of the
document. Changing the eject directionU
“How to change the document eject direction
and scanning accuracy” on page 78
Operations for Image Files that
were Scanned or Received
You can perform the following operations for scanned
files or scanned files that were sent by e-mail from
another printer.
You can execute this function whether the optional
MFP scanner is installed or not.
❏ Print
You can only print PDF files and TIFF files when
the optional Adobe PostScript 3 expansion unit is
installed.
Furthermore, printing is carried out along the
following loading paths depending on the model
you are using.
❏ SC-T7200 Series/SC-T5200 Series/
SC-T3200 Series
Loaded roll paper or cut sheet
❏ SC-T7200D Series/SC-T5200D Series
Select a Source for the scan to print settings
from Roll 1, Roll 2, Roll Auto, or Cut
Sheet.
❏ Send as an e-mail attachment
❏ Send to a shared folder on the network
❏ Delete a file
Buttons that are used in the following settings
A
Select the or tab icon.
When the optional hard disk unit or Adobe
PostScript 3 Expansion Unit is installed, then
appears in the tab even if the optional MFP is not
installed to the printer. Copying and scanning
cannot be done, but the following operations can
be done.
❏ Rcvd Scan File Option
*
❏ Receive New Scan File
❏ Scan File Options
*
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Copying and Scanning
81