Operation Manual

Buttons that are used in the following settings
A
At Large copy/Large scan screen, use the d/u
buttons to select Scanner Maintenance and
press the Z button.
B
Press the d/u buttons to select Eject Direction
or Scan Speed and press the Z button.
C
Use the d/u buttons to select the desired option
and press the Z button.
D
Press the W button to exit.
Large Copying
This section describes the procedure to copy on the
control panel of the printer.
Copies are printed along the following loading paths
depending on the model you are using.
❏ SC-T7200 Series/SC-T5200 Series/SC-T3200 Series
Loaded roll paper or cut sheet
❏ SC-T7200D Series/SC-T5200D Series
Select a Source for the Copy Settings from Roll 1,
Roll 2, Roll Auto, or Cut Sheet
Buttons that are used in the following settings
A
Turn on the printer by pressing the P button.
When the printer is turned on, the scanner is also
turned on.
B
Load paper suitable for large copying on the
printer.
U “Epson Special Media Table” on page 210
C
Load document on the scanner.
U “When you load a document that is more
than 0.25 mm thick” on page 76
D
Make sure that the Large copy/Large scan screen
appears.
If another screen appears, use the l/r buttons to
select the
tab.
E
At Large copy/Large scan screen, use the d/u
buttons to select Copy and press the Z button.
The Large copy screen appears.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Copying and Scanning
79