Operation Manual

Example
LAN
For supported operating systems and browsers, see the
following section.
U “System Requirements” on page 223
Preparing to Scan
Do the following settings in advance to do "Scan to
e-mail" or "Scan To Shared Folder".
❏ Mail Server Settings
Configure settings with Remote Manager.
U “Mail Server Settings” on page 75
❏ Register email destination addresses and shared
folder addresses
Configure settings with Copy Manager.
U “Creating and Editing the Address Book” on
page 75
c
Important:
If you use the "Scan to e-mail" or "Scan To Shared
Folder" functions or do operations from Copy
Manager without configuring the security settings,
problems may occur, including the interception or
falsification of information.
We recommend that before you use the product,
you sufficiently understand the problems that can
occur during operation without configuring
security settings, and then configure the security
settings at your own discretion and responsibility.
Mail Server Settings
Use Remote Manager to configure the mail server
settings (SMTP/POP3). As with Copy Manager,
Remote Manager is included in the software installed in
the network interface of the printer.
The following procedure describes how to start Copy
Manager.
A
Start a web browser on a tablet terminal or
computer connected to the printer via the
network.
B
Enter the IP address specified on the printer in
the address bar, and then press the Enter key or
the return key.
C
In the displayed screen, click Remote Manager.
D
Open the Setup tab screen, and then click Mail in
the menu on the left side of the screen.
See the online help for more details on Remote
Manager.
Creating and Editing the Address
Book
Use Copy Manager to create and edit the address book
in which to register email destination and shared folder
addresses.
A
Start Copy Manager.
B
In the upper part of the screen, click the Settings
icon.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Copying and Scanning
75