Operation Manual

Control
panel
Copy
Manager
Scan To e-mail ✓✓
Receive e-mail
✓✓
Scan To Shared Folder
✓✓
Scan To HDD ✓✓
Operations for image
files that were scanned or
received by e-mail
*2, *3
Print
*4
✓✓
Thumbnail display ✓✓
Send as an e-mail
attachment
✓✓
Send to a folder
✓✓
Download file - ✓
Delete ✓✓
Add or edit e-mail desti‐
nation addresses
-
✓
Add or edit shared folder
addresses
-
✓
Check file operation his‐
tory
-
✓
Scanner maintenance
Eject Direction
✓
-
Calibration ✓ -
Feed Adjust ✓ -
Scan Speed ✓ -
*1 Available only when the optional hard disk unit or
Adobe PostScript 3 Expansion Unit has been
installed.
*2 In the case of Scan To e-mail and Scan To Shared
Folder as well, all scanned image files are saved to
the hard disk of the printer.
*3 Operation is possible whether the optional MFP
scanner is installed or not.
*4 You can only print PDF files and TIFF files when
the optional Adobe PostScript 3 expansion unit is
installed.
How to start Copy Manager
Copy Manager is equipped with the printer's network
interface and functions if one of the following is
installed to the printer.
❏ MFP scanner
❏ Hard disk unit
❏ Adobe PostScript 3 expansion unit
However, if the MFP Scanner is not installed, you
cannot use the large copying and large scanning
functions.
The following procedure describes how to start Copy
Manager.
A
Start a web browser on a tablet terminal or
computer connected to the printer via the
network.
B
Enter the IP address specified on the printer in
the address bar, and then press the Enter key or
the return key.
C
In the displayed screen, click Copy Manager.
The printer does not have a wireless LAN function. To
connect the printer and a tablet terminal over the
network, you need a wireless LAN router or wireless
LAN access point.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Copying and Scanning
74