Operation Manual

A
When you have created the data, click Print in
the File menu.
B
After confirming that the printer is selected, click
Printer properties or Properties to display
printer settings.
C
In the Advanced tab, click the Settings button in
the Hard Disk Unit area and select Print and
Save or Save only.
D
Next, print the document normally.
If Save only is selected, the print job will be saved
to the optional hard disk unit but not printed.
Viewing, Printing and
Deleting Saved Print Jobs
This section describes how to view, print and delete
saved jobs from the control panel.
Buttons that are used in the following settings
A
Confirm that the printer is ready to print. Press
the l/r buttons to select , and press the Z
button.
The Print Queues menu will be displayed.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Saving to and Reprinting on the Optional Hard Disk Unit
71