Operation Manual

How to use Remote Manager
Start and use the software from the web browser of a
computer or tablet terminal that is connected to the
printer via the network.
In addition to checking the printer's status and doing
network settings, you can Upload And Print and Print
From Folder.
Starting Procedure
A
Start a web browser on a tablet terminal or
computer connected to the printer via the
network.
B
Enter the IP address specified for the printer in
the address bar, and then press the Enter key or
the Return key.
If any of the following options is installed,
proceed to step 3.
❏ MFP scanner
❏ Hard disk unit
❏ Adobe PostScript 3 expansion unit
If none are installed, Remote Manager starts.
C
In the screen that is displayed, click Remote
Manager.
The printer does not have a wireless LAN function. To
connect the printer and a tablet terminal over the
network, you need a wireless LAN router or wireless
LAN access point.
Example
LAN
For supported operating systems and browsers, see the
following section.
U “System Requirements” on page 223
Overview of Upload And Print and
Print From Folder
Upload And Print and Print From Folder are functions
that start Remote Manager and to print from a
computer or tablet terminal on which a printer driver is
not installed.
Upload And Print
Just select the file you want to print and upload it to the
printer to print it. If the browser you are using supports
drag and drop, you can upload multiple files in a batch
and print them in order.
Print From Folder
You can select a file in a shared folder that has been setup
in advance and print it.
Supported files
The following files are supported by Upload And Print
and Print From Folder. The supported files vary
depending on whether or not the optional Adobe
PostScript 3 expansion unit is installed.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Introduction
27