Operation Manual

F
Move the printer.
c
Important:
Use the casters on the dedicated printer stand
only to move the printer indoors a short
distance over a level floor. They can not be
used for transport.
Notes on Transporting
Make the following preparations in advance before
transporting the printer.
❏ Turn off the printer and remove all cables.
❏ Remove any paper.
❏ Remove any optional components if they are
installed.
To remove the optional components, see the Setup
guide included with each of them, and then reverse
the attachment procedure.
c
Important:
When removing the MFP Scanner and stand, first
attach the metal fittings and scratch-prevention
sheet shown in the following illustration to the
stand. After attaching the metal fittings, remove the
MFP Scanner from the stand. If the order is
incorrect, the stand will be damaged.
Furthermore, repack it using the original box and
packing materials to protect it from shock and
vibration.
!
Caution:
❏ The printer is heavy. When you pack or move
the printer, use two or more people for the
SC-T3200 Series and four or more people for
the SC-T7200 Series/SC-T7200D Series/
SC-T5200 Series/SC-T5200D Series when
carrying it.
❏ When you lift the printer, maintain a natural
posture.
❏ When you lift the printer, place your hands at
the locations indicated in the following
illustration.
If you lift the printer while holding other
sections, you may be injured. For example, you
may drop the printer or your fingers may be
pinched when lowering the printer.
When you move the printer while packaging it, place
your hands at the positions in the illustration, and then
lift.
SC-T7200 Series/SC-T7200D Series/SC-T5200 Series/
SC-T5200D Series
B
A
C
A D
B C
D
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Appendix
222