Operation Manual

Black or white horizontal stripes or
uneven colors appear in copied/
scanned images
o
The rollers of the MFP Scanner may be soiled.
Turn off the printer and open the scanner cover, and
then clean the rollers.
U “Cleaning the MFP Scanner (option)” on
page 190
o
The glass that covers the image sensor maybe
soiled.
Turn off the printer and open the scanner cover, and
then inspect the top surface of the glass.
If the glass is stained, wipe it.
U “Cleaning the MFP Scanner (option)” on
page 190
If the glass surface is very scratched, contact your
dealer or local Epson Support.
Calibration
If you cleaned the glass surface and rollers inside the
MFP Scanner, but horizontal lines are shifted or there
are uneven colors in the copy results or scanned images,
use the following procedure to calibrate the scanner.
Use the calibration sheet included with the MFP
Scanner for calibration.
A
Align the loading guide with the calibration sheet
set position.
B
Align the right edge with the loading guide so
that calibration sheet is loaded from the black
side.
C
Insert the calibration sheet horizontally until its
edge touches the inner roller.
The calibration sheet is loaded automatically
until the read start position.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Problem Solver
206