Operation Manual

c
Important:
Other than when you are removing paper
jams, do not touch the print head. If you touch
the print head with your hand, static
electricity may cause a malfunction.
D
Cut the top portion of any torn or crinkled areas
using a commercially available cutter.
E
After removing the any torn or crinkled area,
press the Z button and close the printer cover.
F
Remove the cut paper.
When using SC-T7200 Series/SC-T5200
Series/SC-T3200 Series
When roll paper loaded on Roll 1 is jammed on
the SC-T7200D Series/SC-T5200D Series
Remove the jammed paper via the paper feed slot
or the eject slot.
When roll paper loaded on Roll 2 is jammed on
the SC-T7200D Series/SC-T5200D Series
(1) Pull out the Roll 2 unit, and then rewind the roll
paper with your hand.
(2) When paper is jammed at the rear side, open
the rear cover, and then remove the jammed
paper.
(3) Close the rear cover, and then tighten the three
fixing screws.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Problem Solver
203