Operation Manual

Item Description
Add Margins
The margin set in Roll Paper Margin is added to the
outside of the scanned area and then the document is
printed. (refer to the following illustration)
Borderless The scanned area is printed as is. (refer to the following
illustration)
The Roll Paper Margin setting is disabled.
Density
Level -3 to 3 (0
*
)
Set the copy density. Negative values (-) are lighter, and
positive values (+) is darker.
Contrast
Level -3 to 3 (0
*
)
Set the contrast. Negative values (-) are weaker, and
positive values (+) are stronger.
Background
Level -3 to 3 (0
*
)
Set the adjustment value for the background. Configure
this setting when you are copying documents with colors
or documents that are thin, or when removing unwanted
backgrounds. Negative values (-) are weaker, and positive
values (+) are stronger.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Using the Control Panel Menu
176