Operation Manual

Item Description
Margin Options
Clip By Margins
*
A 3-mm margin is added to the inside of the scanned area
on all four sides and then the document is printed. (refer to
the following illustration)
If part of the image is in the margin, it is not printed.
If a value other than 3 mm is set for the Roll Paper Margin,
a margin of that value, excluding the 3 mm from the other
values, is added to top and bottom of the scanned area.
For example, if Top15mm/Bottom15mm is set, a margin
of 12 mm is set in
as shown in the illustration below.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Using the Control Panel Menu
175