Operation Manual

Large Copy / Large Scan menu
This menu is displayed only when the optional MFP Scanner is connected.
U “Large Copying and Large Scanning using the MFP Scanner (Option)” on page 73
*1: SC-T7200D Series/SC-T5200D Series only
*2: SC-T7200 Series/SC-T5200 Series
*3: Displayed when the optional hard disk unit or Adobe PostScript 3 Expansion Unit is installed
*4: Displayed when Adobe PostScript 3 Expansion Unit is installed
* Default setting
Copy Settings
Item Description
Source
Roll Paper (or Roll 1
*1
)
*
Select the paper source for copying.
If you select Roll Auto, the roll of paper that leaves the
smallest margins is automatically selected, and then
printing is done.
Roll 2
*1
Roll Auto
*1
Cut sheet
Scaling
Manual
*
25 to 400% (100
*
)
Choose whether to set the copy scaling manually
(Manual) or zoom automatically in accordance with the
width of the loaded roll paper (Auto).
Auto
Color/Grayscale
Color
*
Select whether to print color documents in color or in
grayscale.
Grayscale
Document type
Text/Line Drawing
*
Select the type in accordance with the loaded document.
Tracing Paper
Recycled Paper
Blueprint
Blueprint Inverted
Poster
Width
Auto
*
The default setting of Auto is recommended in most
situations. Note that, depending on the document, it may
not be possible to detect the width correctly even when
the setting is Auto. In such cases, change from the
standard size and specify a width of your choosing.
ISO A, US-ANSI,
US-ARCH, JIS B, ISO
B
The supported sizes are
displayed.
cm
20 to 90cm (20
*
)
inch
8 to 36in (8
*
)
Quality
Speed
*
Choose the quality of copying.
Fine prioritizes quality so the print speed is slower.
Fine
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Using the Control Panel Menu
174