Operation Manual

Administrator Menu
Item Description
Change Password Enter an administrator password of up to 20 characters.
Selecting Administrator Menu displays a password prompt. The Administrator
Menu will only be displayed if the correct password is entered, preventing
non-administrators from accidentally changing settings.
Keep the password in a safe place.
Should you forget the password, contact your dealer or Epson Support.
Operational
Control
Network Setup Password Required Choose whether the administrator password is
required to access Network Setup from the
control panel or Remote Manager.
No Password Required
*
Power Cleaning
Inspect the printed pattern and select the check boxes for patterns with faint or
missing areas. To select all nozzles, place a check in the box on the left.
Format HDD
*3
Non-Secure
(Quick)
A confirmation message is displayed, if you approve, the optional hard disk unit or
Adobe PostScript 3 Expansion Unit (hereinafter referred to as the hard disk) that is
installed on the printer is formatted.
You can select from the three types of formatting.
❏ Non-Secure (Quick): The file control information for the data saved on the
h ar d d is k is d e le t ed . T hi s is a l so d o ne w he n us in g a ha rd di sk th at wa s us e d in a
different printer as a replacement in your printer.
❏ Secure (Quick): The entire hard disk is overwritten with a random strings. The
data is deleted more securely than with Non-Secure (Quick). However, it
may be possible to recover the data by using special data retrieval tools.
❏ Secure (Sanitizing): The disk is overwritten with 00/FF/random data by
using an algorithm that is compliant with the US Department of Defense
(DoD 5220-22m). This takes the most time for the formatting to finish, but the
data is the most securely deleted. Select this to delete highly confidential
data.
Secure (Quick)
Secure (Sanitizing)
Printer Mode
Auto
*
Normally, leave the setting at Auto. Sent print data is identified, and the operation
mode is switched automatically. If operation mode switching is not performed
correctly, and printing is not performed correctly, set to the operation mode to be
used.
PostScript
*4
HP-GL/2
Date And Time MM/DD/YY HH:MM Set the printer’s built-in clock. The time provided
by the clock is used when printing logs and status
sheets.
Time Zone Enter the difference between the current time zone and GMT.
The selected time zone is used in e-mail notifications sent by Remote Manager
when an error occurs and so on.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Using the Control Panel Menu
171