Operation Manual

Item Description
Quick Cut
On
*
Specify the cutting operation for printing multiple page jobs.
If you turn this On, while the next job is printing, the preceding print job is
cut when its end reaches the cutting position. This shortens the printing
time because printing and cutting are done in tandem.
However, this function is enabled when the following settings are done in
the printer driver.
❏ Plain Paper is selected for Media Type.
❏ Speed is selected as the Resolution for Print Quality.
Details for cutting operations are the same as Single Cut for Borderless
printing.U “About Roll Paper Cutting” on page 104
If you turn this OFF, the next job starts printing after the preceding print
job is fed to its cutting position and cutting is completed.
Off
HP-GL/2 Settings
Item Description
Quality Speed Choose Print Quality in view of image quality and print speed.
Fine
*
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Using the Control Panel Menu
158