Product specifications
19
Finally, attach the media holding plates at either side of the media. Position the plates so that the edges of the media are in the
centres of the round holes. Then slide the plates until the white line is visible in the square window and push the plates down to
lock them in place. Close the front cover, your media is now loaded.
At this stage, the SureColor will automatically ask the operator to conrm the media setting via the control panel.
Productivity Tools
Ink mark sensor
As part of the Epson SureColor Series printers efforts to enhance productivity an operator can efciently set up new substrates
with optimal quality parameters via the automatic adjustments of this printer.
Demonstrate the ease of operation through the control panel by selecting ‘Media setup>Customize Settings’ and performing
an auto adjustment of either ‘Head Alignment’ or ‘Feed Adjustment’.
Epson LFP Remote Panel 2
If you have more than one SureColor S-Series printer, you can use the Epson LFP Remote Panel 2 software to perform
software upgrades and copying media set up and calibration data from one device to another. This productivity tool enables
you to efciently duplicate media customisation settings on each device thus reducing printing downtime.