User`s guide

Maintenance 88
2. Ink spatters on the base of the print head can be removed using a clean room wipe (not
included).
Cleaning the Wiper and Caps
1. Clean the front and back of the wiper with a cleaning stick.
If the attachment points do not require cleaning, clean the wiper as shown below and
proceed to step 7.
Important:
❏ Be sure not to touch the nozzle surface during cleaning. Failure to observe this
precaution could damage the print head.
❏ The parts shown below are sensors. Be careful not to touch this area with your hands
or clean room wipes. Failure to observe this precaution could affect print quality.