User`s guide

Basic Operations 62
As shown in the identified sections in the illustration below, if the tensions of the left and
right edges of the media are different, the media cannot be taken up correctly. If there
is slack on one side, repeat from step 1.
7. Press the d button to feed the media until the take-up roll core begins to turn.
Removing the Take-up Roll
The procedure for removing media varies depending on whether you are using the
installed auto take-up reel unit or the optional auto take-up reel unit for heavy media.
Follow the steps below when using the supplied auto take-up reel unit.
When the Heavy Roll Auto Take-up Reel Unit is installed See “Using the Optional Heavy
Roll Media Feeding Unit” on page 38.
Note:
As shown in the illustration below, you can confirm differences in tension by lightly tapping
on both edges of the media.
Important:
The auto take-up reel unit will not work if the tension bar is raised.