User`s guide

Basic Operations 55
6. Tighten the roll core holder fixing screw to fix the roll core holder in place.
For information on counterclockwise take up, see the following section.
For information on clockwise take up, see “Clockwise Take-Up” on page 59.
Counterclockwise Take Up
1. Attach the media to the take-up roll core.
Tape the media to the take-up roll core in the center and then at the left and right edges.
Pull the media straight down when taping the left and right edges.
2. Press the d button in the control panel to feed enough media for a single wrap around
the roll core.
Important:
Stop when part A is no longer visible. The take-up reel unit may not function as expected
if the holder is inserted too far.