User`s guide

Appendix 133
Specifications Table
*1 Use a shielded twisted pair cable (category 5 or better).
*2 With supplied media system installed; ink not included.
Printer Specifications
Printing method On-demand ink jet
Nozzle configuration 360 nozzles × 2 rows × 4 colors (black, cyan, magenta, yellow)
Resolution (maximum) 720 × 1440 dpi
Control code ESC/P raster (undisclosed command)
Media feed method Friction feed
Built-in memory 512 MB for Main
128 MB for Network
Interface Hi-Speed USB-Compatible with the USB 2.0 Specification.
100BASE-TX/1000Base-T
*1
Rated voltage AC 100 to 240V
Rated frequency 50 to 60Hz
Rated current 1.0 to 0.5 A
Power consumption Printing: Approx. 65 W
Ready mode: Approx. 20 W
Sleep mode: Approx. 9 W
Power off: 0.5 W or less
Temperature Operating: 15 to 35 °C/59 to 95°F (15 to 25°C/59 to 77°F recommended)
Storage (before unpacking): -20 to 60°C or -4 to 140
o
F (no more than 120 hours at
60°C or 140
o
F, within a month at 40°C or 104
o
F)
Storage (after unpacking): -20 to 40°C or -4 to 104
o
F (within a month at 40°C or
104
o
F)
Humidity Operating: 20 to 80% (40 to 60% recommended) (without condensation)
Storage (before and after unpacking): 5 to 85% (without condensation)
Dimension Storage (minimum) dimensions: 2620 (W) × 915 (D) × 1311 (H) mm or 103.2 (W) ×
36.0 (D) × 51.6 (H) inches
Maximum dimensions: 2620 (W) × 1259 (D) × 1650 (H) mm or 103.2 (W) × 49.6 (D)
× 65.0 (H) inches
Weight
2
Approx. 225 kg (496.0 lb)