User`s guide

Using the Control Panel Menu 109
Menu Item Parameter
Media Setup
See “The Media Setup
Menu” on page 111.
Media Remaining
Remaining Setup On, Off
Length 5.0 to 99.5 m (15 to 300 ft)
Remaining Alert 1 to 15 m (4 to 50 ft)
Print Remaining Length Print
Select Media RIP Settings, 1 to 30 (media setting bank number)
Customize Settings
Current Settings Change settings for currently selected media. The options
available depend on whether RIP Settings or a media setting
bank is selected. More information on the options available
can be found below in the entries for RIP settings and media
setting banks 1 to 30.
RIP Settings
Platen Gap 1.5, 2.0, 2.5
Head Alignment
Input thickness. Manual(Uni-D), Manual(Bi-D)
Roll Type Printable Side Out, Printable Side In
Tension Measurement Periodically, Every Page, Off
Media Tension 0 to 40
1 to 30 (media setting bank number)
Setting Name Up to 22 half-size characters
Feed Adjustment Manual
Platen Gap 1.5, 2.0, 2.5
Head Alignment Manual(Uni-D), Manual(Bi-D)
Drying
Drying Time Per Pass 0 to 10 sec
Media Suction 0 to 10
Head Movement Data Width, Printer Full Width
Multi-Strike Printing Off, 2 to 8
Roll Type Printable Side Out, Printable Side In
Tension Measurement Periodically, Every page, Off
Media Tension 0 to 40
Feed Speed 1 to 2
Print Media List Print