User`s guide

Related tasks
Performing a Nozzle Check
Cleaning the Print Head
Washing the White Ink Tubes (White Edition)
Shaking and Replacing the Ink Cartridges
Replacing the Waste Ink Bottle
Replacing the Head Cleaning Set
Cleaning the Suction Cap
Printer Setup Menu Settings
Settings on the Printer Setup menu let you run print quality adjustment utilities.
Caution: Follow the instructions in the topic links below the table to use these menu settings correctly.
Setting Options Description
Head Alignment — Select to run the head alignment utility
to correct grainy or blurry print results
by realigning the print head for each
platen size; this alignment does not
affect your print results if you selected
Uni-Directional as the Head Move
Direction setting on the USB File List
menu
Offset Head Alignment –10 to +10 Use this setting when you change the
platen height but do not want to
perform Head Alignment. One stop
down on the platen (3 to 4 for example)
is equivalent to a -3 setting. Also used
for fine-tuning alignments when a
spacer pad is used to raise the flat
surface of the garment to be imaged
on.
Feed Adjustment –1.00% to +1.00% Select to adjust the platen feed each
time the print head moves; select a
higher number if dark lines appear or a
smaller number if faint lines appear
125