User`s guide

Note: Be careful when removing the waste ink tubes; waste ink may spill from the outlet or tube.
12. Insert the waste ink outlet plugs.
13. Remove the flushing pad and clean any ink underneath it.
14. Plug the drain outlet with a lint-free cloth.
15. Tilt the printer and move it through a narrow doorway as described above.
Parent topic: Transporting the Printer
Related tasks
Setting Up the Printer After Transport
Setting Up the Printer After Transport
Follow these steps to set up the printer after moving it. See the Start Here sheet for detailed information.
1. Verify that the location is suitable for installation.
2. Install the waste ink tube and the waste ink bottle.
3. Connect the power cable to an electrical outlet and turn on the printer.
4. Perform a nozzle check and confirm that there are no clogged nozzles.
5. Align the print head and check the print quality.
Parent topic: Transporting the Printer
119