User`s manual

85
Version 1.1 Revised February, 2009
Chapter 8 - FastRIP Print Options
Importing a File and Import Options
From the FastRIP 10 toolbar, the Open button can be clicked to import an image file (e.g., EPS,
BMP, TIFF, etc.) or you can select File>>Import.
Alternatively, an image file can also be drag-and-dropped onto the FastRIP 10 window, causing
that file to be imported. In either
case, the File Import Options are
applied when importing the given
file.
Scaling ` :
is Option lets you scale
the image either by preserv-
ing the aspect ratio (check-
box) or changing it to fit
your needs.
Optimize Image for Speed ` :
is option will downsize
unnecessary file sizes in
order to print faster.
` Always use these settings when importing: is option will allow you
to use the same import settings for all file types.
If checked, the Image Import dialog will
no longer open every time you import
an image. In this case, to gain access to
this dialog in the future, go to
Queue>>Properties>>Import Options
tab.
Uncheck the Hide Image Import
dialog and use the following settings
checkbox. is will gray out the screen
and allow you to make the necessary
settings each time you import an image
into FastRIP.
NOTE: Refer to following section for addition Import Options.