User`s manual

Chapter 8 - FastRIP Print Options
80
FastRIP 10.0 User’s Manual
vI e W Ra W da t a WI n d o W oP t I o n s
In the View Raw Data Window, you will notice a toolbar offering several options. ese options
are outlined below.
Sa v e
Select the Save button to save the picture as a bitmap image for comparisons or later viewing.
pr i n t
Select the Print button to print the preview. For example, the preview can be printed to a desk-
top printer for use as a sample.
zO O m tO O l S
Select Zoom In, Zoom Out, or select a Percent Zoom to view the image as a whole, or particular
sections within the image.
CO l O r pl a n e S
Clicking the Planes Select button opens the Select Planes to View dialog. e color channels
used to print the image will be listed. Unchecking color channels is useful as a means of confirm-
ing the inks that will be used when rendering the image.
For example, suppose that a CMYK printer is being used to print a grayscale image using only
the Black (K) channel:
1. Click the Plane Select button. Each of the color channel checkboxes will be
checked.
2. Uncheck the Black checkbox.
3. e preview should now be blank because the CMY channels are not being
sent data.
Substrate Color: e Substrate button (at the bottom) will open up a color
picker window that indicate the media color. Alternatively, the color picker
can be used to simulate different media colors.
1. Click the Background color picker.
2. Choose color that best matches the media color.
3. Click OK to view the spool data on the new media color.
Zoom
In
Print
Zoom
Out
Zoom
Selection
Color Plane
Selection
Configure
Image
Information
Save