User`s manual

Chapter 6 - Page Layout
62
FastRIP 10.0 User’s Manual
2) On the Media Setup tab, set the Type to either Roll media, or Fixed sheet me-
dia. is step is required on initial setup.
3) On the Layout Manager tab, the Layout mode drop-list will now be available.
NOTE: If you have already set the media settings in step 2, you will not have to set each time, unless you want to
change your default selection.
ty P e s o F ne s t I n g la y o u t mo d e s
ma n u a l la y O u t S
When Manual is selected, jobs are added to the Active Jobs list without conserving media in the
Media Preview. However, nesting can still be applied, per figures (shown in Figures 1 -3) where
the Auto Nest All Content command is used to reposition jobs and create a page break.
Fig. 1 (left) - When Manual is
selected, jobs are added to the
Preview Pane without reposition-
ing to conserve media.
Fig. 2 (right) - Right-click an
empty portion of the Preview
Pane, and then choose Auto-
matic Nesting >> Auto Nest All
Content.
Fig. 3 (bottom) - e jobs are au-
tomatically nested to use the full
width of the media, and a page
break is used to define the edge of
the nested jobs.