User`s manual

55
Version 1.1 Revised February, 2009
Chapter 6 - Page Layout
SH i r t a n d Ca p la y O u t
is is a template layout that
will print a T-shirt and a Cap
from the same image.
Both slots are set to the same
slot number and because they
are different sizes both use the
Scale to Fit Always, so that the
image will be scaled to the cor-
rect size for the shirt board and
the cap board.
e Shirt board is set for rotate
270, as the neck of the shirt will
be loaded on the left and the cap
will be no rotation.
When a job is imported
into FastRIP the job is scaled and
correctly laid out ready for
output for both a T-shirt and a
Cap.
PR I n t I n g te m P l a t e sl o t s
When printing to slots in a template, you may want to scale and position your job in
FastARTIST or application of your choice such as PhotoShop. As the template slots are user
definable, you will still want a way to create custom page sizes to match the slot size.
You can do this using the custom page size feature in the File – Print – page setup dialog (you
will find this in advanced) or in the Page setup in FastRIP setup, there is a custom option.
Setup the custom page to match your slot size and you can then position and size your job ap-
propriately.
NOTE: is only applies if you want to avoid scaling and positioning in FastRIP.