User`s manual

Version 1.1 Revised February, 2009

Chapter 6 - Page Layout

e Copy slot spacing will allow you to adjust the

measurement between the copied slots (either by left

and right or by above and below). e measurements

here must be entered prior to selecting a copy func-

tion in order for the entry to work properly.

So, if you wanted extra space between the ﬁrst slot and the one that will go below

it, do the following:

Select the slot to copy `

Enter the extra measurement in the appropriate ﬁeld `

Click ` Copy selected slot down in position.

NOTE: If an icon is grayed out, it is not available for use, i.e., not having enough room on the template available.

5. Separate slot numbers (if necessary).

Copying slots will leave all the slots with the same slot number (1). is is ﬁne if

you are for printing copies of the same job. If you want to print diﬀerent designs

on each slot, change the slot numbers of the duplicate slots.