User`s manual

Chapter 6 - Page Layout
48
FastRIP 10.0 User’s Manual
cR e a t I n g a cu s t o m te m P l a t e
Select Add New Media 1.
ere are 2 ways to select Add New
Media.
` Select Add New Media from the
Template list in the Media setup.
` Select Add New Media from
the main window in the
smart menu area (with no
job selected) you can select
Add New Media from the
Template Media options
drop down selection.
2. Set Name and Page Size
e Template Setup Dialog will open.
First, enter in a name for the `
template under Name. For
this example, we’ll be setting
up a 3-up Shirt Board tem-
plate for the Blazer PRO
Next, select the total page `
size under Based on Sheet.
For this example, 17x45
inches is the total printing area of the machine.
NOTE: You can enter in a custom size by selecting Custom from the list. Enter the dimensions under Size.
e next step is to define the first slot. 3.
Slots are somewhat like nesting where you set the printable areas and later assign
the images to those areas for printing. For this example, the slots will represent
the Shirt Boards on the Blazer Pro. Jobs are printed inside of the slots and areas