User`s manual

Chapter 2 - Installation
18
FastRIP 10.0 User’s Manual
Un-installing FastRIP
Should you need to un-install FastRIP
from your computer, click on Start > Con-
trol Panel and locate the icon labeled Add
or Remove Programs. Double-click on this
icon and another window will open. Scroll
through the listings until you see FastRIP.
Click on the program to highlight and
then click on the Remove button. In the
FastRIP Setup window select Remove and
click on Next.
e un-install process will remove most of the program components, however a folder MUST
still be deleted from your hard drive. Right-click and Explore your My Computer icon on your
desktop. Double-click on your C:\ drive and double-click on the folder labelled Program Files.
Right-click on the FastRIP folder and select Delete. Delete the RIP driver by going into Start >
Settings > Printers and Faxes. Right-click on Epson Color Stylus *, Epson Photo Stylus *, or Epson
Stylus Pro * Full/Sheet and select Delete.
Re-installing FastRIP
If you are going to re-install the program you DO NOT need to un-install first.
Simply place the CD back in the computer and allow it to run through a `
normal installation.
Click on ` Yes when asked if you wish to install over the existing version of
FastRIP.
Click on ` Ok when asked if it’s Ok to share the folder.
Restart your computer. `
NOTE: Whether you are using a USB or Parallel Dongle on the PC, you will not need to remove the Dongle
during a re-installation of the software. Your computer already knows to recognize the Dongle from the previous
installation.