User`s manual

17
Version 1.1 Revised February, 2009
Chapter 2 - Installation
SC a n n i n g F O r re S O u r C e S
e installation program will scan the computer for available resources. It may take several mo-
ments for the installation to resume. You will then see the installation progress window.
co n c l u d I n g t h e In s t a l l a t I o n
Once the installation is complete, FastRIP will ask if you want to re-boot your computer. Refer
to the following sections that referring to your particular dongle type to conclude the install.
pa r a l l e l dO n g l e in S t a l l a t i O n
If you will be using the ` Parallel
Port Dongle, select “No, I will re-
start my computer later” and click
Finish.
Manually shut down your comput- `
er and turn OFF your printer.
Insert the Parallel Port Dongle. `
After inserting your Dongle, turn `
ON the power to your printer and
then reboot the computer.
uSb dO n g l e in S t a l l a t i O n
If you will be using the ` USB Dongle, select “Yes, I want to restart my
computer now” from the on-screen menu.
Click Finish. FastRIP will shut down the computer and automatically `
reboot it.
Once the computer has rebooted and the Windows desktop has returned, `
insert your USB Dongle.
IMPORTANT POINT
In the event you have a bad Dongle or the Dongle driver was not installed correctly, a window will
pop-up stating, “Dongle Error, Dongle not found or valid.” is means the Dongle was not recog-
nized by the computer. Verify that the Dongle’s serial number matches the serial number from the
Product.icf file.