User`s manual

Chapter 2 - Installation

FastRIP 10.0 User’s Manual

You can also check by clicking on Start > Settings > Printer and Faxes. An icon

representing your printer should now appear in the Printers and Faxes window

that just opened.

You must now conﬁgure FastRIP to work with your printer.3.

Go to ` Start > Programs > FastRIP 10.0 and click on FastRIP.

Select your Epson printer and click on ` Next.

On the next screen, select the option “Search for new printer package ver- `

sions from CD.”

Place a check mark by “Search CD-ROM or ﬂoppy drive.” `

Click on ` Next. Click on Next.

Click on ` Finish.

Next you need to set the default printer your software will use.4.

In the FastRIP main window, go to ` Printers > Manage Printers.

Place a check in the Control Panel box next to your Epson printer and `

click on Ok.

FastRIP is now ready to use. Refer to the following section, Installing

FastRIP Software, for further instructions.

Installing FastRIP Software

At this point, you have conﬁrmed that your FastRIP package contains both the installation CD

and Dongle security device. e following steps are an overview of installing FastRIP. Within the

installation wizard, further information is provided with each individual stage of the wizard.

e FastRIP installation process will install both FastRIP and printer support ﬁles. During the

installation of FastRIP, there should be no other applications running. Many antivirus software

programs can also interfere with the installation, so it is recommended you also disable any anti-

virus software until the FastRIP installation process is complete.