User`s manual

11
Version 1.1 Revised February, 2009
Chapter 2 - Installation
ca R t R I d g e In s t R u c t I o n s F o R Fa s t RIP hI g h sP e e d
FastRIP High Speed requires that you have one of the following printers listed below. FastRIP
High Speed uses 4 ink cartridges to print out your film positives REALLY FAST! You can still
print color images with your printer because the 4 black cartridges utilize the light-colored ink
slots.
ep S O n 4800 a n d 4880
ep S O n 7800 a n d 7880
ep S O n 9800 a n d 9880
e 4 black cartridges will go in slots 5-8 on any of the six printer models.
Computer Connections
e following sections will cover connecting your FastRIP dongle to your computer as well as
your printer.
do n g l e co n n e c t I o n
Both the Parallel port and USB port Dongles require specific steps be followed when connecting
them to your computer. Please read the installation instructions completely before connecting
the Dongle.
WARNING If you are using a Parallel Port Dongle, you MUST shut down your
computer before plugging in the Dongle. Your printer must also be turned OFF. With the
printer and computer OFF, you may insert your Dongle after installing the FastRIP
software.
IMPORTANT POINT If you are using the Blue-colored USB Dongle,
DO NOT plug in the Dongle until AFTER you are finished with the software
installation. If the Dongle is inserted into a USB port prior to installing
the FastRIP software, Windows may install the wrong driver. It is safe
to insert the USB Dongle into a USB port while your computer is
running.
If your package included either a Kingston or Orange-colored
dongle, CONNECT IT NOW. Windows will automatically
detect the device. You can then click Next to continue.
If your package included a Blue-colored dongle, then connect
it as outlined at the end of the product installation.