User`s manual

5
Version 1.1 Revised February, 2009
Chapter 1 - Introduction
Supported Printers
As of the writing of this Manual, FastRIP 10.0 supports the Epson Stylus Color 1520, 3000,
R1400, R1800, R1900, R2400, the Epson Stylus Photo 2200 and the Epson Pro 4000, 4800
and 4880. FastRIP XL supports the Epson 7600/7800/7880 and FastRIP LF supports the Epson
9600/9800/9880. FastRIP 10.0 also supports the T-Jet Blazer Series inkjet-to-garment printers as
well as the T-Jet SDT-1000, T-Jet2 SDT 2200 and T-Jet3 Plus and 3300 models.
Security Device Dongle
FastRIP is provided with a software protection device, called
a “Dongle,” to prevent unauthorized use or pirating of the
software. For a Windows/PC you can use either a USB or
Parallel Port Dongle. You specified the type you wanted when
you ordered the software. In either case, the Dongle is visible to
FastRIP, yet remains transparent to other applications.
Po l I c y on lo s t oR st o l e n se c u R I t y de v I c e s
e USB security device provided with FastRIP is your proof of purchase. `
If the dongle is lost or stolen, then that is equivalent to losing the entire
software package, and a new package of FastRIP must be purchased.
In the event of a damaged security device that must be replaced, there is a `
nominal fee for EXCHANGING a new device for the older device, where
the older device must be reclaimed by U.S. Screen.
is fee is waived where product is still under warranty.
Regardless, it is recommended that you ensure that your security device is `
covered under your business insurance policy.
IF t h e do n g l e do e s no t Wo R k
If failure of the hardware (Dongle) has resulted from accident, abuse or misapplication, U.S.
Screen shall have no responsibility to replace the hardware. Replacement will be warranted for
the remainder of the original warranty period or 1 (one) year, whichever is longer. If the Dongle
ceases to operate within the warranty period, it will be replaced at no charge AFTER it has been
returned to the U.S. Screen & Inkjet Technology.
You must insure the Dongle for at least $250 against loss or damage during mailing. If the
Dongle is not under warranty, a replacement Dongle may be purchased. Contact U.S. Screen for
pricing or for details on purchasing or returning a defective Dongle. All returns must be shipped
with a traceable carrier and have a return authorization number on the box provided by U.S.
Screen Print & Inkjet Technology.