User`s manual

Chapter 10 - Output Settings
156
FastRIP 10.0 User’s Manual
Ro l l -Fe e d
When outputting in Banner Mode, the printer will advance the film a few inches after printing
so you can cut it with the optional paper cutter (available from Epson.com). It then pulls the
film back in when you start the next print routine to minimize film waste.
FI l m lo a d I n g
If using large sheets, slide the paper guide all the way to the right. Also, make sure the film goes
UNDER the small paper feed holder. See your Epson Manual for more details.
us I n g yo u R In k j e t PR I n t e R F o R su B l I m a t I o n Pu R P o s e s
Many users feel that once they have invested in the Epson printer for FastRIP they can then also
use the sublimation cartridges and create sublimation transfers for mugs, caps, shirts, metal, etc.
You DO NOT want to use the same printer for both. e sublimation cartridges are over $500
per set and when you flush the ink line to change from sublimation to regular ink, you can loose
up to $75 in ink. You may also find sublimation inks create clogging issues.
We highly recommend dedicating a second EPSON Printer if you want to print sublimation
transfers.