User`s manual

Chapter 10 - Output Settings
150
FastRIP 10.0 User’s Manual
PR I n t te s t Pa g e oP t I o n s
From the Printers menu, choose Print Test Page to print the selected charts.
te S t pa g e
is Test Page is specifically designed to help recognize
changes due to tonal adjustments. For example, the indi-
vidual tints can be checked by referring to the tint percentage
boxes, whereas the overall balance is checked by looking at
the color graduation. For advice concerning how to interpret
this test page, please refer to the Color Adjustments settings
that are available through the Queue Properties.
in k li m i t ta r g e t
e Ink Limit Target is primarily used by the Advanced Calibration Wizard to determine a good
“starting point” with respect to ink limit settings when creating a new media profile.
For example, here is how the Ink Limit Target is used in the Advanced Calibration Wizard to
profile new media:
1. Begin by choos-
ing an existing
print mode that is
“close” to what is
desirable for the
loaded media and
inks.
2. is will be your
“starting point” for
creating the new
print mode.
3. In the Advanced Calibration Wizard, proceed to the Print Mode Options page
and indicate the “Starting point” print mode.
4. Click Next to proceed to the Print Calibration Chart page.
5. Click the Adjust Ink Limits button to open the Adjust Ink Limits dialog.