User`s manual

139
Version 1.1 Revised February, 2009
Chapter 10 - Output Settings
Additional Output Features
ou t P u t sc h e d u l I n g
Output scheduling is used to choose how jobs are scheduled when received by Visual Production
Manager. Common scheduling scenarios are:
For print jobs, spool print jobs as they are received, but holding the `
spool file until the appropriate media has been loaded.
For print and cut jobs, printing the jobs as they are received, but holding `
the cut portion until the printed media has been loaded into the cutter.
For print-laminate-cut jobs, holding the cut portion until after the `
printed media has been laminated.
Note: If the queue is Stopped, then all jobs are automatically placed on Hold, regardless of the Output
Scheduling settings.
ad d I n g cR o P ma R k s
Queue Pull-down Menu>>Properties>>Crop
Marks tab
Crop Marks are standard registration symbols
that are printed along the bounds of a print job,
which can then be used for either cutter align-
ment, or aligning printed pieces in a layered
assembly.
By default, the crop marks are flush with the job
edge, though this can be varied by increasing the
offset.