User`s manual

Chapter 10 - Output Settings
138
FastRIP 10.0 User’s Manual
se P a R a t I o n s I n Il l u s t R a t o R ®
e following procedure was written using Illustrator CS2. For other versions of Illustrator,
please refer to the Illustrator help file or documentation.
Before creating separations, verify that the design is in CMYK color mode. From 1.
the File menu, choose Document Color Mode >> CMYK Color.
From the 2. File menu, choose Print. e Print dialog will open.
On the left-hand side of the Print dialog are several categories of controls. e
categories are General, Setup, Marks and Bleeds, Output, Graphics, Color Man-
agement, Advanced, and Summary.
Click the 3. Output category of controls.
Set the 4. Mode, Emulsion, and Image according to your workflow.
Beside each color channel is a printer icon. Tick these icons to indicate the chan-5.
nels that should be printed as separations.
For each color channel, double-click to edit the halftone settings. Refer to the Il-6.
lustrator help file for an explanation of these controls.
Click 7. Print to print the separations to FastRIP.